How-to-install-and-configure-Nethserver-6.7-Dual-WAN-(PART2)
In our first article we have configured interface as below:-
1. Interface eth0 :- 192.168.1.1 < = Local LAN IP
2. Interface eth1 :- 192.168.15.98 < = This my static WAN IP
3. Interface eth2 :- PPPoE < = Second PPPoE WAN
Please change the above WAN IP with your real WAN IP provided by your ISP provider.
1. Now lets configure our interface eth1 :-
Login to the interface :- https://192.168.1.1:980
Goto=> Network => Edit eth1 => Configure the IP address
Select the Role = Internet (red)
Now lets try pinging the internet connection
So Now internet is working means NAT is working.
2. Lets configure the second interface eth2 :-
Goto => Network => Click on New Interface => Internet (red) => PPPoE
It will create a new logical interface with PPPoE connection
Next Select Interface "eth2" and fill PPPoE details
3.After the configuration is done then you have to enable the basic firewall for Multi WAN option :-
Goto => Software center => Select=>Basic firewall, Bandwidth monitor => Click ADD button
After the installation is finished logout and login again
4. Now select the Multi WAN option in left hand side
Click on Configure and select the mode "Balance" and configure the email address for the notification
Please do Likes, Comments and Share.
This article is the second part of Nethserver Configuration. Please check my first article on how to install and configure Nethserver-6.7.Check the below link for more details
http://www.techs2resolve.in/2015/12/how-to-install-and-configure-nethserver.htmlIn our first article we have configured interface as below:-
1. Interface eth0 :- 192.168.1.1 < = Local LAN IP
2. Interface eth1 :- 192.168.15.98 < = This my static WAN IP
3. Interface eth2 :- PPPoE < = Second PPPoE WAN
Please change the above WAN IP with your real WAN IP provided by your ISP provider.
1. Now lets configure our interface eth1 :-
Login to the interface :- https://192.168.1.1:980
Goto=> Network => Edit eth1 => Configure the IP address
Select the Role = Internet (red)
Now lets try pinging the internet connection
So Now internet is working means NAT is working.
2. Lets configure the second interface eth2 :-
Goto => Network => Click on New Interface => Internet (red) => PPPoE
It will create a new logical interface with PPPoE connection
Next Select Interface "eth2" and fill PPPoE details
3.After the configuration is done then you have to enable the basic firewall for Multi WAN option :-
Goto => Software center => Select=>Basic firewall, Bandwidth monitor => Click ADD button
After the installation is finished logout and login again
4. Now select the Multi WAN option in left hand side
Click on Configure and select the mode "Balance" and configure the email address for the notification
That's it you can configure more advance function as per your requirement. You can configure the load balancing of traffic and assign the priority.
Please do Likes, Comments and Share.
Related Posts :
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments